QUESTION – What is your backset Measurement? SEE DETAILS BELOW
The “BACKSET” measurement is the measurement from the center of the door handle post – to – the edge of the door where the lock strip is machined flush into the door panel.
MEASURE ACCURATELY – Hoppe ONLY provides (4) Backset Options. Choose Below.
Photo shows 1 3/4″ Backset. (Most Common)

****** NOTE ***** All ” IN STOCK” Gear Boxes have a 1″ Dead Bolt Throw. WE DO NOT STOCK 1/2″ DEAD BOLT VERSIONS. We Feel a 1″ Deadbolt is more secure.
Check to see if you have or can drill out the depth to accommodate a ONE INCH DEAD BOLT.
THE DEAD BOLT MUST BE ABLE TO EXTEND FULLY WITHOUT INTERRUPTION..
DEAD BOLT
A Hoppe replacement gearbox is the absolute fastesty and most economical way to repair your broken Hoppe multipoint door lock.. It restores the dreaded drooping, sagging lever handle, and immediately repairs the activation with a new control gearbox.
Key Benefits
-
-
Fixes Sagging Handles: Repairs broken internal return springs that cause the lever handle to droop or sag.
-
Restores Latch and Lock Function: Resolves issues with missing or worn gear teeth that cause ratcheting noises, binding, or failure to engage the multi-point locking points.
-
Cost-Effective Repair: Replaces only the worn central mechanism instead of buying a brand-new full strip or lock body.
-
Extends System Lifespan: Rejuvenates your existing Hoppe HLS-9000 hardware without altering the exterior trim or faceplate.
-
Easy Maintenance: Features reversible handing that can be adjusted to match left- or right-swing doors.
-
Further Exploration
-
-
Read about compatibility requirements or call 954-804-1044 for expert assistance.
-
Review part details and measurements.
-
If you’d like help choosing the correct part, please call:
- What is your current backset measurement (e.g., 35mm, 45mm, 60mm or 70mm)? There are only (4) backsets that Hoppe Offers in their product lines.
- Does your lock have a mishandling device wedge abojust below the stiker latch?
- Are you experiencing a drooping handle or a stuck key?
Primary Locking Point Variants
The HLS-9000 system uses a central lock case (gearbox) with a latch and deadbolt, combined with different auxiliary locking points distributed along the drive rail:
-
- Swing Hook: Features rotating hook-shaped bolts that grip into the frame strike plates. This type offers high resistance against forced entry and pry attacks.
- Shootbolt: Utilizes vertical round or rectangular pins that extend upward into the head frame and downward into the sill threshold. It provides top and bottom security alignment.
- Tongue: Employs solid metal rectangular tabs (tongues) that extend out from the faceplate into the strike pockets. It is frequently paired with other systems like shootbolts.
- Roundbolt: Uses cylindrical bolt pins that project outward into the frame, providing smooth engagement.
- Roller Pin: Incorporates adjustable cam rollers that move into strike plates to pull the door tight against the weather stripping.
- Automatic (Slam Lock): Features trip-released mechanisms where closing the door automatically triggers the auxiliary locking points without needing to lift the handle manually.
Faceplate Widths and Edge Profiles
Hoppe manufactures the HLS-9000 drive rails and faceplates in standard metric dimensions to fit standard Eurogroove routings on wood, fiberglass, aluminum, and vinyl doors:
-
- 16 mm Faceplates: The standard narrow profile width used across most residential single and double door preparations.
- 20 mm Faceplates: A wider profile option providing added surface area and structural screw support, often utilized on heavy commercial or oversized architectural doors.
- End Styles: Available in both radius (rounded) and square ends depending on the factory routing of the door stile.
Door Function and Panel Configurations
The HLS-9000 hardware accommodates different functional panel types within a frame assembly:
-
- Active Door Locks: The primary operating panel containing the main gearbox, handle spindle holes, and cylinder cutout for key operation.
- Inactive Door Locks: Used on the secondary passive panel of French (double) doors. These typically feature inactive shootbolt or flushbolt assemblies to secure the stationary panel until manually released.
- Sliding Door Multipoint Systems: Specially engineered versions configured for sliding patio doors rather than traditional swinging hinged doors, utilizing hook or tongue designs tailored to sliding operation tracks.
This is the best way to repair a drooping sagging lever handle. Works on all Hoppe HLS-9000 manually activated multipoint door locks.
If you need help. Email me at hoppelocks@gmail.com You can also send pictures here for proper identification.