8778267 Hoppe Automatic Tongue Lock – New Replacement

$232.67

#8778267 Hoppe Automatic Tongue Lock, 35mm backset, 14mm deadbolt, Tongue @ 6 7/16″.

 

 

Available on backorder

Description

8778267 Hoppe Automatic Tongue Lock, 45mm Back set, 25mm deadbolt.

#8778267  Hoppe Automatic Tongue Lock, 35mm backset, 14mm deadbolt,HLS-9000 Series with Lower Tongue @ 6 7/16″

No Shoot bolt, 36″ handle height,16mm Faceplate, Tongue Version. For Automatic lock replacement on Hoppe and Fuhr multipoint locks.

 

 

Automatic Tongue Lock Specifications:

Below are the exact details of this particular Hoppe Automatic Tongue Multipoint Lock component.

 

Brand:                              Hoppe (Replaces Fuhr Automatic Locks)
Series:                             HLS-9000, Handle Above European Profile Cylinder
Type:                                Automatic Tongue Lock, No Bottom Shootbolt
Component:                     Automatic Lock Body only
Model Number:                8778267
Activation:                        Automatic, Multi-points activate when door closes, Turn thumb turn to lock securely.
Faceplate Width:              5/8″ Wide
Handle Height:                  36″ From Bottom of Door to Center of Handle Can be trimmed for Handle Heights less than 36″
Backset:                               1 3/8″  Backset
PZ Dimension:                     3 5/8″  Center of Handle to Center of Key Hole.
Dead Bolt Throw:                1/2″  Throw  
Lower Tongue Position:      Tongue @ 29 9/16″ Down from Handle  or   6 7/16″ up from bottom of door.
Bottom Shootbolt:                N/A – Hoppe Automatic Tongue Locks Are Not Available With Shootbolts
Roller Release trigger:         42 1/2″ from bottom of the door, 6 1/2″  from Handle Height indication line
Trimmable:                            Yes,  1 3/16″ Max    Allowing 34 13/16″ – 36″ Handle Height Range

 

Locking Points: Measured from the Bottom of the door, up to the center of tongue locking point.


Click on the “Part Number” to take you to the product page.

 

 

Part Number Lock Part Upper Locking Point Extension Length Overall Top Extension + Gear = Door Panel Height  Roller & Release Trigger Location from bottom of door up, If HH is 36″  ALTERNATE LP #1
8778579 Top Extension Tongue 1045mm – 41 1/8″ Use For Door Panel Heights Between    71 1/16″   –   78 1/4″ Roller release trigger @ 42 1/2″  / Upper Tongue lock point @ 64 3/4″
8778583 Top Extension Tongue 1220mm  – 48″  Use For Door Panel Heights Between    71 1/16″   –   85 5/8″  Roller release trigger @ 42 1/2″  / Upper Tongue  lock point @ 72 9/16″
8778587 Top Extension Tongue 1395mm –54 15/16″   Use For Door Panel Heights Between    79 1/8″  –  92 1/2″ Roller release trigger @ 42 1/2″  / Upper Tongue lock point @ 80 5/8″
8778591 Top Extension Tongue 1570mm –61 13/16″   Use For Door Panel Heights Between     79 1/8″  –  99 7/16″ Roller release trigger @ 42 1/2″  / Upper Tongue lock point @ 86 9/16″
8778595 Top Extension Tongue 1745mm-68 11/16″   Use For Door Panel Heights Between      88 3/4″  –  106 5/16″ Roller release trigger @ 42 1/2″  / Upper Tongue lock point @ 86 9/16″
8778607 Top Extension Tongue 2270mm – 89 3/8″   Use For Door Panel Heights Between      104 1/2″  –  126 15/16″ Roller release trigger @ 42 1/2″  / Upper Tongue lock point @ 99″
Part Number Lock Part Locking Point Backset Dead Bolt Throw Roller Lock Point From Bottom of Door Up
8778271 Gear Tongue 35mm (1.38) 14mm   –  1/2″ Lower Tongue @  9 9/16″ up from bottom of door
8778303 Gear Tongue 45mm (1.77) 14mm   –   1/2″ Lower Tongue @  9 9/16″ up from bottom of door
8778247 Gear Tongue 35mm (1.38) 25.4mm   –   1″ Lower Tongue @  9 9/16″ up from bottom of door
8778291 Gear Tongue 45mm (1.77) 25.4mm    –   1″ Lower Tongue @  9 9/16″ up from bottom of door
8778267 Gear Tongue 35mm (1.38) 14mm   –   1/2″         Lower Tongue @  6 5/16″ up from bottom of door 
8778299 Gear Tongue 45mm (1.77) 14mm   –   1/2″         Lower Tongue @  6 5/16″ up from bottom of door 
8778243 Gear Tongue 35mm (1.38) 25.4mm   –   1″         Lower Tongue @  6 5/16″ up from bottom of door 
8778287 Gear Tongue 45mm (1.77) 25.4mm    –   1″         Lower Tongue @  6 5/16″ up from bottom of door 

Replacement for Hoppe & Fuhr Automatic Tongue Lock systems. Must replace Entire Fuhr lock components with Hoppe Lock body and Top extension.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

If you are having problems finding a Hoppe Automatic Tongue Multipoint Lock or Top Extensions, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 4 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe HLS-9000

Product Number

8778267

Series

HLS-9000 Series Automatic Lock Component

Lock Engagement

Automatic Engagement

Locking Point

Automatic Tongue

Backset Width

35mm (1 3/8")

PZ Measurement

92mm (3 5/8")

Deadbolt Throw

14mm (1/2")

Faceplate Width

16mm – 5/8" wide

Automatic Trigger Location

Roller Release Trigger Pin is located at 42 1/2" measured from the bottom of door panel up to the center of the trigger pin.

Lower Tongue Locking Point

6 7/16" From Bottom of door.

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!