8778331 -Hoppe Manual Lock Gear – HLS-9000 Series – 3 Point Lock with Bottom Shootbolt Only

$187.56

Part Number 8778335 Hoppe Manual Lock Gear-  3 Point Multi-point lock with shootbolt., 16mm faceplace, 25mm deadbolt, 36 inch handle height. This version require a European profile lock cylinder to active the deadbolt.  This will not work with a handle trimset that uses an American cylinder with a tailpiece.

 

 

Available on backorder

SKU: 8778331 Categories: , Tags: , , , , Product ID: 15127

Description

8778331 Hoppe Manual Lock Gear.

The Hoppe #8778331  Manual Lock Gear, HLS-9000 Series with Shoot Bolt Only -16mm Faceplate, 3 Point Lock Version. 45mm Backset, 25mm deadbolt throw.

If you are not sure about the 3 point multi-point lock or lock components you need, Click Here to have us help you find them.

 

Hoppe multipoint door locks are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.

Component Specifications:

Below are the exact details of this particular Hoppe Manual 3 Point Multipoint Lock component. Other variations are available.

Component Details

Brand:      Hoppe
Series:      HLS-9000, Handle Above European Profile Cylinder
Configuration:   Multi-point Locking System
Component:     Locking Gear
Model Number:    8778331
Activation:      Manual, Lift handle to engage shootbolt, Turn thumb turn to lock securely.
Faceplate Width:    16mm (5/8")      
Lock Points:      Bottom Shoot bolt only - 3 point lock
Handle Height:     36" From Bottom of Door to Center of Handle.
Backset:      45mm (1 3/4")  Measurement from Edge of Door to Center of Handle
PZ Dimension:    92mm (3 5/8") Center of Handle to Center of Key Hole.
Dead Bolt Throw:    25mm ( 1") Center of Handle to Center of Key Hole.
Multi-Point Position:    None, shoot bolt only, 3 point lock.
Bottom Roller Position:   None

  • Shoot bolt extends when door handle is lifted and lock is engaged.
  • Turn thumb turn to lock
  • Combine Top Extension with Gear for complete lock
  • Faceplate width: 16 mm
  • Mid extension does not have any locking points,
  • Top extension does not have any locking points, Only locks with top shootbolt
  • Lock gear does not have any locking points, Only locks with bottom shootbolt
  • Handle height: 36” [914 mm]
  • Lock Gear length: 37.6” [955 mm]
  • Gear length + top extension length = overall length

Variations available:

Activation Types:  Manual Activation,  Automatic Activation and Electronic Activation.

Multipoints:    For Automatic Multipoint Lock Systems – Available in Tongue and Roller pin Versions only. For Manual Activated multipoint lock systems, 3 Point with shootbolt, Hook bolt, Round bolt, Tongue and Roller Pin version are available.

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Backset Variations:  Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) ,  45mm (1 3/4″) ,  60mm  (2 3/8″) and  70mm (2 3/4″).

 

Click on the   “Part Number”  below to take you to the product page.

Part Number Lock Part Locking Point Extension Length Description Trimmable
8778611 Top Extension Shootbolt 400 mm (15.74″) M / 400 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8778615 Top Extension Shootbolt 475 mm (18.70″) M / 475 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8778619 Top Extension Shootbolt 550 mm (21.65″) M / 550 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8778623 Top Extension Shootbolt 625 mm (24.60″) M / 625 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8778627 Top Extension Shootbolt 700 mm (27.55:”) M / 700 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8778631 Top Extension Shootbolt 775 mm (30.51″) M / 775 / SB1 / 16-SC / 20 / 100 Yes – Trimmable up tp 3.93″ Max
8779199 Middle Extension None 191 mm (7.51″) M / 191 / 16-SC / K/ZC No
2424114 Middle Extension None  441 mm (17.36″) M / 441 / 16-SC / K/ZC No
8778691 Middle Extension None 691 mm (27.20″) M / 691 / 16-SC / K/ZC No
8778695 Middle Extension None 1141 mm (44.92″) M / 1141 / 16-SC / K/ZC No
8778699 Middle Extension None 1591 mm (62.63″) M / 1591 / 16-SC / K/ZC No
3174559 Middle Extension None 2041 mm (80.35″) M / 2041 / 16-SC / K/ZC No
Part Number Lock Part Locking Point Backset Dead Bolt Throw Description
8778339 Gear Shootbolt 35mm (1.38) 14mm (0.55) M/35/14 / 914 / SB1 / 16-SC / 20
8778343 Gear Shootbolt 45mm (1.77) 14mm (0.55) M/45/14 / 914 / SB1 / 16-SC / 20
8778335 Gear Shootbolt 35mm (1.38) 25mm (1.00) M/35/25 / 914 / SB1 / 16-SC / 20
8778331 Gear Shootbolt 45mm (1.77) 25mm (1.00) M/45/25 / 914 / SB1 / 16-SC / 20
2406514 Gear Shootbolt 60mm (2.375) 25.4mm (1.00) M/60/25 / 914 / SB1 / 16-SC / 20
2406522 Gear Shootbolt 70mm (2.75) 25.4mm (1.00) M/70/25 / 914 / SB1 / 16-SC / 20
2875118 Cover Plate N/A N/A N/A 37×16 mm

Advantages of the Hoppe 8778331 Manual 3 Point Multipoint Door Locking System.

Hoppe multipoint door lock are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

8778331

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

Top or Bottom Shootbolt – typical of 3 point locks

Backset Width

45mm – 1 3/4" measured from edge of door to center of handle

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of keyhole

Deadbolt Throw

25mm – 1" projection

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Bottom Shootbolt

Yes, Lock gear has shootbolt that engages into the sill locking point

Top Shootbolt

Yes, Top extensions have a shootbolt that engages into the header locking point

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!