2074564 -Hoppe Manual In-Active Lock Gear – HLS-9000 Series – 35mm Backset with Bottom Shootbolt

$184.27

2074564 -Hoppe Manual In-Active Lock Gear – HLS-9000 Series – 35mm Backset with Bottom Shootbolt. This  is for handle activated locking systems.

 

 

Available on backorder

Description

2074564 Hoppe Manual In-Active Lock Gear.

The Hoppe #2074564  Manual In-active Lock Gear, HLS-9000 Series with Shoot Bolt Only -16mm Faceplate, For passive door, 35mm Backset, with bottom shootbolt locking point.

If you are not sure about which In-active multi-point lock or lock components you need, Click Here to have us help you find them.

 

Hoppe in-active multipoint door locks are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.

Component Specifications:

Below are the exact details of this particular Hoppe Manual In-Active Multipoint Lock component. Other variations are available.

Component Details

Brand:                   Hoppe
Series:                  HLS-9000, In-Active Lock, Handle at 36"
Configuration:           Multi-point In-active Locking System
Component:               Locking Gear for passive door
Model Number:            2074564
Activation:              Manual, Lift handle to engage shootbolt
Faceplate Width:         16mm (5/8")      
Lock Points:             Bottom Shoot bolt only - In-active lock 
Handle Height:           36" From Bottom of Door to Center of Handle.
Backset:                 35mm (1 3/8")  Measurement from Edge of Door to Center of Handle
Multi-Point Position:    None, Bottom shoot bolt only on In-active locks


  • Shoot bolt extends when door handle is lifted and lock is engaged.
  • Combine Top Extension with Gear for complete lock
  • Faceplate width: 16 mm
  • Top extension does not have any locking points, Only locks with top shootbolt
  • Lock gear does not have any locking points, Only locks with bottom shootbolt
  • Handle height: 36” [914 mm]
  • Lock Gear length: 37.6” [955 mm]
  • Gear length + top extension length = overall length

Additional components available:

Tope Extensions:  Manual Activation Top extensions with shootbolt

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Backset Variations:  Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) ,  45mm (1 3/4″) ,  60mm  (2 3/8″) and  70mm (2 3/4″).

 

Click on the   “Part Number”  below to take you to the product page.

 

Part Number Lock Part Locking Point Extension Length Overall Length
(with 914mm 36″ Handle Height)
Description
3416909 Inactive Top Extension Shootbolt 16.33” (415mm) 66.89” – 70.83” (1699mm – 1799mm) IA / 415 / SB1 / 16-SC / 20 / 100
8778759 Inactive Top Extension Shootbolt 19.29” (490mm) 69.84” – 73.78” (1774mm – 1874mm) IA / 490 / SB1 / 16-SC / 20 / 100
8778763 Inactive Top Extension Shootbolt 22.24” (565mm) 72.80” – 76.73” (1849mm – 1949mm) IA / 565 / SB1 / 16-SC / 20 / 100
8778767 Inactive Top Extension Shootbolt 25.20” (640mm) 75.75” – 79.69)” (1924mm – 2024mm) IA / 640 / SB1 / 16-SC / 20 / 100
8778771 Inactive Top Extension Shootbolt 28.15” (715mm) 78.70 – 82.64” (1999mm – 2099mm) IA / 715 / SB1 / 16-SC / 20 / 100
8778775 Inactive Top Extension Shootbolt 31.10” (790mm) 81.65” – 85.59” (2074mm – 2174mm) IA / 790 / SB1 / 16-SC / 20 / 100
8778779 Inactive Top Extension Shootbolt 34.06” (865mm) 84.61” – 88.54” (2149mm – 2249mm) IA / 865 / SB1 / 16-SC / 20 / 100
8778783 Inactive Top Extension Shootbolt 37.01” (940mm) 87.56” – 91.50” (2224mm – 2324mm) IA / 940 / SB1 / 16-SC / 20 / 100
8778787 Inactive Top Extension Shootbolt 44.88” (1140mm) 90.31” – 99.37” (2294mm – 2524mm) IA / 1140 / SB1 / 16-SC / 20 / 230
8778791 Inactive Top Extension Shootbolt 52.76” (1340mm) 98.19” – 107.24” (2494mm – 2724mm) IA / 1340 / SB1 / 16-SC / 20 / 230
8778795 Inactive Top Extension Shootbolt 60.63” (1540mm) 106.06” – 115.12” (2694mm – 2924mm) IA / 1540 / SB1 / 16-SC / 20 / 230
8778799 Inactive Top Extension Shootbolt 68.50” (1740mm) 113.94” – 122.99” (2894mm – 3124mm) IA / 1740 / SB1 / 16-SC / 20 / 230
8778803 Inactive Top Extension Shootbolt 76.38” (1940mm) 121.81” – 130.87” (3094mm – 3324mm) IA / 1940 / SB1 / 16-SC / 20 / 230
Part Number Lock Part Locking Point Backset Description
2074564 In-active Gear Shootbolt 35mm (1.38) IA/35 / 914 / SB1 / 16-SC / 20 / 1384 Click Part Number to View Product
1997447 In-active Gear Shootbolt 45mm (1.77) IA/45 / 914 / SB1 / 16-SC / 20 / 1384 Click Part Number to View Product
2406557 In-active Gear Shootbolt 60mm (2.375) IA/60 / 914 / SB1 / 16-SC / 20 / 1384 Click Part Number to View Product
2406565 In-active Gear Shootbolt 70mm (2.75) IA/70 / 914 / SB1 / 16-SC / 20 / 1384 Click Part Number to View Product
2875118 Cover Plate N/A N/A 37×16 mm

 


Advantages of the Hoppe 2074564 Manual handle activated In-Active Multipoint Door Locking System.

Hoppe multipoint door lock are the absolute best in-active multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

 

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 55 × 5 × 5 in
Manufacturer

Hoppe

Product Number

2074564

Series

HLS-9000 Series – Passive Door

Lock Engagement

Manual Engagement

Locking Point

Top or Bottom Shootbolt – typical of in-active door panel locks

Backset Width

35mm – 1 3/8" measured from edge of door to center of handle

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of thumb turn

Deadbolt Throw

None, Not available on In-active locks

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Bottom Shootbolt

Yes, Lock gear has shootbolt that engages into the sill locking point

Top Shootbolt

Yes, Top extensions (sold separately) have a shootbolt that engages into the header locking point

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!