Hoppe Locksmith in Wimberley, TX That Replace Multipoint Door Lock Systems.
We are here to Find Locks For Lock Replacement Company, Contractors,Trade Professionals and Door Lock Service.
If You Are a Lock Replacement Company, Trade Professionals, Door Lock Service, Homeowners in Wimberley and all over Hays county, and you are searching for experienced lock repair professionals to replace their Hoppe door locks, in the 48209 zipcode.
There are not enough multipoint lock repair companies to Find Locks For Wimberley residents.
More often, many door repair shops do not repair Hoppe locks.
HERE ARE SOME OF THE REASONS WHY.
- 1. American type door locks have been around for centuries and multipoint locks only decades. Many trade professionals would prefer to mainly service the older non multipoint locks.
- 2. Multi-point locks are usually supplied directly to door manufacturers, and can be very difficult finding the replacement lock you need. If the part is out of warranty, they may not provide any help.
- .3. There is not much training offered on multipoint locks, Especially in Wimberley, Texas 48209. This involves door prep, machining for installation, replacement, trouble shooting or even periodic service.
- 4. Most multipoint lock companies do not mark the locks with a catalog number for repair. This can be aggravating if you do not know how to correctly measure and order.
- 5. There are plenty of multipoint lock that produce various production and custom series product line locks with assorted locking types, handle heights, backset sizes, deadbolt measurement, PZ measurements, handle orientation to key hole, American or European lock cylinder, Manual or Automatic activation, Key wind operation or with top and bottom shootbolts. VERY COMPLICATED WITHOUT ANY HELP RIGHT?
*** Lock Replacement Company, Trade Professionals and Door Lock Service, CLICK BELOW TO PRINT OUT THE HOPPE FIELD MULTIPOINT MEASURING GUIDE **
********* FIELD WORKSHEET SUBMISSION OPTIONS********
A. ONLINE - SUBMIT MEASUREMENT DETAILS BELOW
. B. FAX - FIELD WORKSHEET TO (954) 971-4588
C. SCAN WORKSHEET AND EMAIL TO: HOPPELOCKS@GMAIL.COM
Assortment of {Locks|Multipoint Locks|Locking Systems We Typically Supply in Wimberley, Texas.
Tongue Locks
Roller Pin Locks
Round Bolt Locks
Swing Hook Locks
In-Active & Active Shootbolt Locks
We Have Hoppe Lock Gearboxes. The Easiest possibility to Repair a Hoppe HLS-9000 Manually Operated Round Bolt Lock System.
- Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
- Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
- Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
- Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
- No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..
Replacement Lock By Caradco 4101341 Active and In-active French Doors.
- Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
- Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
- Works on Left or Right Caradco Swinging doors.
We Are Looking to Find Locks For Assist Wimberley Lock Replacement Company, Trade Professionals, Door Lock Service and “Do It Your Selfers”. The Most Difficult Thing Is To Locate and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service
FAQ - Frequently Asked Questions: From Wimberley locksmiths and residents, about Hoppe Locks.
Q. Can you just replace the gearbox to repair a Hoppe HLS-9000 lock?
A. Yes, If the lock is the current version, You may only need a replacement gearbox. The current Hoppe multipoint locks have what is called a “dead Latch” or “mis-handling device wedge”, between the latch and the deadbolt. Your existing lock that you are replacing must be equipped with one of these. Older lock versions missing this device, will not accommodate a new Hoppe gearbox on the lock strip faceplate. The entire lock gear body must be replaced.
Q. Is it very difficult to install the replacement gearbox on a Hoppe Lock?
A. No, There are only 2 screws to remove to replace the gearbox. Once you remove the handle set and lock gear, there are two machine screws that attach the gearbox to the lock strip faceplate. Remove the screws and attach you new gearbox, making sure that the lock shift rail is connected to the tranfer bar on the back side of the lock strip faceplate.
Q. Does a replacement Hoppe gearbox work on an automatic tongue lock?
A. No, We only have replacement gearboxes for manual Hoppe Locks. Hoppe HLS-9000 manually operated gearboxes will not work on a Hoppe Automatic engaging lock. The lock strip faceplate does not have a cutout for a mis-handling device wedge, nor will it engage when the door is closed. Manual locks engage the locking points when the lever handle is lifted upwards.
Q. Do you know of any locksmiths that repair Hoppe multipoint locks near Wimberley, Texas, or anywhere close to Hays county?
A. No, but if you find a local Wimberley locksmith that is will to do the work, we can help them out with taking all the correct measurements, ordering the correct lock and answering any questions needed to replace the lock. We have a collection of instructional forms and videos that help make the task much easier. A good handyman or a mechanically inclined homeowner should be able to perform the repair.
Q. Do you have Caradco 4101341 multipoint locks for both panels in a double French door?
A. Yes, The Caradco 4101341 type lock is available for the active and passive door panels. The actual lock body is 41 inches and separates approximately 10 inches up from the bottom and about 62 inches from the bottom of the door panel. The upper and lower shoot bolt extensions do not need to be replaced. Top and bottom shoot bolt extensions rarely ever need replacement.
How To Videos for Hoppe Lock replacement in Wimberley, Texas and other cities near Hays county.
Tags: 48209, hoppe, Lock Replacement Company, Multipoint, Texas, Wimberley