Hoppe Locksmith in Fragaria, WA That Work On Multipoint Door Locks.
We are here to Find Locks For Door Builder, Homeowners,Multipoint door lock repair and Lock Replacement Company.
If You Are a Door Builder, Multipoint door lock repair, Lock Replacement Company, Homeowners in Fragaria and all over Kitsap county, and you are searching for competent lock repair professionals to fix their multipoint door locks, in the 53035 zipcode.
There are not enough multi-point lock repair companies to Find Locks For Fragaria homeowners.
Unfortunately, many door repair shops will not work on Hoppe locks.
HERE ARE MANY OF THE REASONS WHY.
- 1. Older locks have been around for centuries and multipoint locks only decades. Many locksmiths would prefer to work only on the older non multipoint locks.
- 2. Multipoint locks are usually provided directly to door manufacturers, and are very hard finding the replacement lock you need. If the lock is out of warranty, they may not offer any assistance.
- .3. There is not much training offered on Hoppe locks, Especially in Fragaria, Washington 53035. This involves door prep, machining for installation, replacement, trouble shooting or even periodic maintenance.
- 4. Most 3 point lock providers do not identify the locks with a catalog number for ordering. This can be aggravating if you do not know how to correctly measure and order.
- 5. There are plenty of multipoint lock that make various stock and custom series product line locks with different locking types, handle heights, backset measuements, deadbolt extension, PZ measurements, handle position to key hole, American or European lock cylinder, Manual or Automatic activation, Key wind operation or with top and bottom shootbolts. VERY COMPLICATED WITHOUT ANY GUIDANCE RIGHT?
*** Door Builder, Multipoint door lock repair and Lock Replacement Company, CLICK BELOW TO PRINT OUT THE HOPPE FIELD MULTIPOINT MEASURING GUIDE **
********* FIELD WORKSHEET SUBMISSION OPTIONS********
A. ONLINE - SUBMIT MEASUREMENT DETAILS BELOW
. B. FAX - FIELD WORKSHEET TO (954) 971-4588
C. SCAN WORKSHEET AND EMAIL TO: HOPPELOCKS@GMAIL.COM
Types of {Locks|Multipoint Locks|Locking Systems We Commonly Provide in Fragaria, Washington.
Tongue Locks
Roller Pin Locks
Round Bolt Locks
Swing Hook Locks
In-Active & Active Shootbolt Locks
We Stock Hoppe Lock Gearboxes. The Quickest Solution to Repair a Hoppe HLS-9000 Manually Operated 5 Point Locking System.
- Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
- Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
- Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
- Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
- No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..
Replacement Lock By Caradco 4101341 Active and In-active French Doors.
- Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
- Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
- Works on Left or Right Caradco Swinging doors.
We Are Looking to Find Locks For Assist Fragaria Door Builder, Multipoint door lock repair, Lock Replacement Company and “Do It Your Selfers”. The Most Difficult Thing Is To Locate and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service
FAQ - Frequently Asked Questions: From Fragaria locksmiths and residents, about Hoppe Locks.
Q. Can you just replace the gearbox to repair a Hoppe HLS-9000 lock?
A. Yes, If the lock is the current version, You may only need a replacement gearbox. The current Hoppe multipoint locks have what is called a “dead Latch” or “mis-handling device wedge”, between the latch and the deadbolt. Your existing lock that you are replacing must be equipped with one of these. Older lock versions missing this device, will not accommodate a new Hoppe gearbox on the lock strip faceplate. The entire lock gear body must be replaced.
Q. Is it very difficult to install the replacement gearbox on a Hoppe Lock?
A. No, There are only 2 screws to remove to replace the gearbox. Once you remove the handle set and lock gear, there are two machine screws that attach the gearbox to the lock strip faceplate. Remove the screws and attach you new gearbox, making sure that the lock shift rail is connected to the tranfer bar on the back side of the lock strip faceplate.
Q. Does a replacement Hoppe gearbox work on an automatic tongue lock?
A. No, We only have replacement gearboxes for manual Hoppe Locks. Hoppe HLS-9000 manually operated gearboxes will not work on a Hoppe Automatic engaging lock. The lock strip faceplate does not have a cutout for a mis-handling device wedge, nor will it engage when the door is closed. Manual locks engage the locking points when the lever handle is lifted upwards.
Q. Do you know of any locksmiths that repair Hoppe multipoint locks near Fragaria, Washington, or anywhere close to Kitsap county?
A. No, but if you find a local Fragaria locksmith that is will to do the work, we can help them out with taking all the correct measurements, ordering the correct lock and answering any questions needed to replace the lock. We have a collection of instructional forms and videos that help make the task much easier. A good handyman or a mechanically inclined homeowner should be able to perform the repair.
Q. Do you have Caradco 4101341 multipoint locks for both panels in a double French door?
A. Yes, The Caradco 4101341 type lock is available for the active and passive door panels. The actual lock body is 41 inches and separates approximately 10 inches up from the bottom and about 62 inches from the bottom of the door panel. The upper and lower shoot bolt extensions do not need to be replaced. Top and bottom shoot bolt extensions rarely ever need replacement.
How To Videos for Hoppe Lock replacement in Fragaria, Washington and other cities near Kitsap county.
Tags: 53035, Door Builder, Fragaria, hoppe, Multipoint, Washington