Hoppe Locksmith in Alameda, NM That Repair Multi-point Door Lock Systems.
We are here to Provide Assitance to Multi-point lock repair service, Contractors,Door Repair Company and Custom door builder.
If You Are a Multi-point lock repair service, Door Repair Company, Custom door builder, Homeowners in Alameda and all over Bernalillo county, and you are searching for experienced lock repair professionals to fix their multi-point door locks, in the 35001 zipcode.
There isn't enough multipoint lock repair companies to Provide Assitance to Alameda customers.
Even worse, most door repair shops will not even look at multipoint door locks.
HERE ARE SOME OF THE REASONS WHY.
- 1. American type door locks have been installed in doors for centuries and multipoint locks only decades. Many trade professionals would prefer to mainly service the older one point deadbolt/handle systems.
- 2. Multipoint locks are usually sold directly to door manufacturers, and can be very hard getting the replacement lock you need. If the lock is out of warranty, they may not provide any help.
- .3. There is virtually no training available on multipoint locks, Especially in Alameda, New Mexico 35001. This involves door prep, machining for installation, replacement, trouble shooting or even periodic adjustments.
- 4. Most 3 point lock manufacturers do not label the locks with a catalog number for replacement. This can be aggravating if you do not know how to successfully measure and order.
- 5. There are plenty of multipoint lock that manufacture various house brand and custom series product line locks with assorted locking types, handle heights, backset distances, deadbolt throws, PZ measurements, handle orientation to key hole, American or European lock cylinder, Manual or Automatic activation, Key wind operation or with top and bottom shootbolts. VERY COMPLICATED WITHOUT ANY HELP RIGHT?
*** Multi-point lock repair service, Door Repair Company and Custom door builder, CLICK BELOW TO PRINT OUT THE HOPPE FIELD MULTIPOINT MEASURING GUIDE **
********* FIELD WORKSHEET SUBMISSION OPTIONS********
A. ONLINE - SUBMIT MEASUREMENT DETAILS BELOW
. B. FAX - FIELD WORKSHEET TO (954) 971-4588
C. SCAN WORKSHEET AND EMAIL TO: HOPPELOCKS@GMAIL.COM
Assortment of {Locks|Multipoint Locks|Locking Systems We Often Ship in Alameda, New Mexico.
Tongue Locks
Manual and Automatic Engaging Tongue Locks. 3 Point Edge Locking System.
Manual Engaging Tongue Locks With Top & Bottom Shootbolts. 5 Point Locking System,
Roller Pin Locks
Manual and Automatic Engaging Roller Pin Locks. 3 Point Edge Locking System.
Manual Engaging Roller Pin Locks With Top & Bottom Shootbolts. 5 Point Locking System,
Round Bolt Locks
Manual Engaging Round Bolt Locks. 3 Point Edge Locking
Manual Engaging Round Bolt Locks With Top & Bottom Shootbolts. 5 Point Locking System,
Swing Hook Locks
Manual Engaging Swing Hook Locks. 3 Point Edge Locking
Manual Engaging Swing Hook Locks With Top & Bottom Shootbolts. 5 Point Locking System,
In-Active & Active Shootbolt Locks
Manual Engaging In-Active Locks. 2 Point Frame/Sill Locking
Manual Engaging Shootbolt Lock. Locks at Deadbolt, Top & Bottom Shootbolts. 5 Point Locking System,
We Stock Hoppe Lock Gearboxes. The Quickest Answer to Repair a Hoppe HLS-9000 Manually Operated Roller Pin Locking System.
- Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
- Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
- Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
- Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
- No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..
Replacement Lock to Repair Caradco 4101341 Active and In-active French Doors.
- Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
- Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
- Works on Left or Right Caradco Swinging doors.
We Are Looking to Provide Assitance to Assist Alameda Multi-point lock repair service, Door Repair Company, Custom door builder and “Do It Your Selfers”. The Most Difficult Endeavor Is To Find and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service
Weather Shield French Doors with Hoppe roller pin multipoint locks in Alameda, New Mexico, 35001 and all over Bernalillo county.
PGT 750 series concealed 3 point rod locking system.56-100 in Alameda, New Mexico, 35001 and all over Bernalillo county.
Fullex Multipoint lock replacement on Ultimate doors of Palm Beach. in Alameda, New Mexico, 35001 and all over Bernalillo county.
Caradco 4101341 Active and inactive multpoint door lock system. in Alameda, New Mexico, 35001 and all over Bernalillo county.
Milgard Multipoint locks in Alameda, New Mexico, 35001 and all over Bernalillo county.
56-175 Concealed Multipoint door lock with rods, 3 point lock
Hoppe tongue lock for Marvin French doors in Alameda, New Mexico, 35001 and all over Bernalillo county.
Hoppe 5 point multi-point lock for Loewen French doors in Alameda, New Mexico, 35001 and all over Bernalillo county.
3 point Hoppe HLS-9000 replacement door lock for Anlin French doors. in Alameda, New Mexico, 35001 and all over Bernalillo county.
Lincoln Replacement door locks in Alameda, New Mexico, 35001 and all over Bernalillo county.
La Finestra a multipoint door lock replacement locks that used Hoppe 5 point lock systems in Alameda, New Mexico, 35001 and all over Bernalillo county.
Jeld-wen French doors with sagging or Drooping handles. Hoppe Lock replacement gearbox will repair a broken lock. in Alameda, New Mexico, 35001 and all over Bernalillo county.
Replacement locks for Discontinued Eagle French doors in Alameda, New Mexico, 35001 and all over Bernalillo county.
Lock to repair Hurd doors with broken locks in Alameda, New Mexico, 35001 and all over Bernalillo county.
Sierra Pacific Multipoint door lock in Alameda, New Mexico, 35001 and all over Bernalillo county.
3 point door lock to repair Hurd broken door locks in Alameda, New Mexico, 35001 and all over Bernalillo county.
Therma-Tru replacement lock to repair the broken 3 point and 5 point tongue lock on older thermatru French doors. in Alameda, New Mexico, 35001 and all over Bernalillo county.
