8778555 Hoppe Manual Tongue Top Extension – No Shootbolt

$74.87

Hoppe Manual Tongue Top Extension, Tongue at 73 3/16″ from Bottom, For door panel heights between 79″ – 92″ OA. This part is trimmable to fit a wide range of doors with multipoint tongue locks.

 

Available on backorder

Description

8778555 Hoppe Manual Tongue Top Extension – No Shootbolt with Tongue at 73 3/16″ From Bottom of door panel

Hoppe Manual Tongue Top Extension without Top Shootbolt – HLS-9000 Series  -16mm Faceplate, Tongue Position   @   73 3/16″ from bottom of door.

If you are not sure about the Manual Lock Tongue Top Extension with (1) Tongue @ 73 3/16″ and No Bottom Shootbolt

or lock components you need,         Click Here to have us help you find them.

 

Hoppe multipoint tongue locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

Hoppe automatic lock for weather shield lock repairTherma tru doors with Hoppe multipoint tongue lock with bottom shootboltHurd peachtree and weather shield french doors with Hoppe multipoint tongue locks with shootbolts

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient  Hoppe multi-point  tongue top extensions.
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.
  • Repairs Locks on Weather Shield Hurd Kolbe Thermatru Therma-Tru Peachtree doors with multipoint door locks with Hoppe manual tongue top extensions.

Component Details

Brand:   Hoppe Series: HLS-9000, Top extension, No Shootbolt
Configuration:     Multi-point Tongue Top Extension, No Shoot Bolt
Component:        Top Extension, No Shoot Bolt
Door Height:   For Door panel heights Between  – 79 1/8″ –  92 1/2″
Faceplate Width:   16mm (5/8″)
Door Brands Used on:     Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru

 

 

  • Tongues extend out into side jamb or in-active door panel, when door handle is lifted and lock is engaged.
  • Turn thumb turn to lock
  • Combine This Top Extension with a Manual Tongue Lock Gear for complete lock system
  • Faceplate width: 16mm  (5/8″)
  • Handle height: 36” [914 mm]
  • Lock Gear length: 37.6” [955 mm]

 

Click on the   “Part Number”  below to take you to the product page.

Part Number Lock Part Tongue Height
(From bottom of door)
Part Length

 

Overall Door Panel Height
(Lock Gear + Top Extension = Overall)
Part Can Be Trimmed a Maximum Of:
3137707 Top Extension (1) Tongue @ 65 1/4″ 1058mm (41.65) 71″ – 79 1/4″ 8 1/4″
8778551 Top Extension (1) Tongue @ 65 1/4″ 1220mm (48.03) 71″ – 85 5/8″ 17 5/8″
8778555 Top Extension (1) Tongue @ 73 3/16″ 1395mm (54.92) 79 1/8″ –  92 1/2″ 13 3/8″
8778559 Top Extension (1) Tongue @ 73 3/16″ 1570mm (61.81) 79 1/8″ – 99 7/16″ 20 5/16″
8778563 Top Extension (1) Tongue @ 82 15/16″ 1745mm (68.70) 88 3/4 – 106 5/16″ 17 9/16″
8778567 Top Extension (1) Tongue @ 98 3/4″ 1920mm (75.59) 104 1/2″ – 113 3/16″ 8 11/16″
8778571 Top Extension (1) Tongue @ 98 3/4″ 2095mm (82.48) 104 1/2″  – 120 1/16″ 15 9/16″
8778575 Top Extension (1) Tongue @ 98 3/4″ 2270mm (89.37) 104 1/2″ – 127″ 22 1/2″
2240631 Top Extension (2)  Tongues @ 62″ & 85″ 1424mm (56.06) 91 15/16″ – 93 11/16″ 1 11/16″
3387298 Top Extension (2)  Tongues @ 73 3/16″ & 95″ 1988mm (78.66) 100 15/16″ – 116 1/4″ 15 5/16″
2949640 Top Extension (2)  Tongues @ 73 3/16″ & 95″ 2093mm (82.40) 100 15/16″ – 120″ 19 1/16″
3021229 Top Extension (2)  Tongues @ 77 5/16″ & 108 13/16″ 2093mm (82.40) 114 11/16″ – 120″ 5 5/16″
Part Number Lock Part Locking Point From Bottom of Door Up Backset Deadbolt Throw Description
2423904 Gear Tongue  @ 11 9/16″ 1 3/8″  Backset            25mm ( 1″ ) M/35/25 / 914 / TN1 / 620 / 16-SC / 160
8779123 Gear Tongue  @ 11 9/16″    1 3/4″  Backset             25mm ( 1″ ) M/45/25 / 914 / TN1 / 620 / 16-SC / 160
8778171 Gear Tongue  @ 9 9/16″ 1 3/8″  Backset 14mm ( 1/2″ ) M/35/14 / 914 / TN1 / 671 / 16-SC / 115
8778167 Gear Tongue  @ 9 9/16″    1 3/4″  Backset 14mm ( 1/2″ ) M/45/14 / 914 / TN1 / 671 / 16-SC / 115
8778147 Gear Tongue  @ 9 9/16″ 1 3/8″  Backset             25mm ( 1″ ) M/35/25 / 914 / TN1 / 671 / 16-SC / 115
8778075 Gear Tongue  @ 9 9/16″     1 3/4″  Backset             25mm ( 1″ ) M/45/25 / 914 / TN1 / 671 / 16-SC / 115
8778159 Gear Tongue  @ 6 5/16″ 1 3/8″  Backset 14mm ( 1/2″ ) M/35/14 / 914 / TN1 / 753 / 16-SC / 30
8778183 Gear Tongue  @ 6 5/16″     1 3/4″  Backset 14mm ( 1/2″ ) M/45/14 / 914 / TN1 / 753 / 16-SC / 30
8778143 Gear Tongue  @ 6 5/16″ 1 3/8″  Backset             25mm ( 1″ ) M/35/25 / 914 / TN1 / 753 / 16-SC / 30
8778163 Gear Tongue  @ 6 5/16″      1 3/4″  Backset             25mm ( 1″ ) M/45/25 / 914 / TN1 / 753 / 16-SC / 30
2406346 Gear Tongue  @ 11 9/16″          2 3/8″  Backset             25mm ( 1″ ) M/60/25 / 914 / TN1 / 620 / 16-SC / 160
2406354 Gear Tongue  @ 9 9/16″           2 3/8″  Backset             25mm ( 1″ ) M/60/25 / 914 / TN1 / 671 / 16-SC / 115
2406362 Gear Tongue  @ 6 5/16″           2 3/8″  Backset             25mm ( 1″ ) M/60/25 / 914 / TN1 / 753 / 16-SC / 30
2406371 Gear Tongue  @ 11 9/16″                2 3/4″  Backset             25mm ( 1″ ) M/70/25 / 914 / TN1 / 620 / 16-SC / 160
2406389 Gear Tongue  @ 9 9/16″                2 3/4″  Backset             25mm ( 1″ ) M/70/25 / 914 / TN1 / 671 / 16-SC / 115
2406397 Gear Tongue  @ 6 5/16″                2 3/4″  Backset             25mm ( 1″ ) M/70/25 / 914 / TN1 / 753 / 16-SC / 30

 

Where to Buy Hoppe Manual Multipoint Tongue Top Extension.

Hoppe multipoint door lock are the absolute best multi point tongue top extension lock to have installed on your hurricane rated impact door. The multipoint tongue lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your tongue lock, Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

8778555

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

Tongue No Shootbolt

Tongue Location

73 3/16 " from bottom of door up to center of tongue

Faceplate Width

16mm – 5/8" wide

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.