Description

8778159 Hoppe Manual Tongue Lock – No Shootbolt with Tongue at 6 5/16″

Hoppe Manual Tongue Lock without Bottom Shootbolt – HLS-9000 Series  -16mm Faceplate, Tongue @ 6 5/16″ from bottom. 35mm Backset, 14mm deadbolt throw.

If you are not sure about the Manual Lock Gear with Tongue and No Bottom Shootbolt

or lock components you need,         Click Here to have us help you find them.

Hoppe multipoint tongue locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

• It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:

• Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks

• Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties

• Easily open and close your door with minimal effort.

• Repairs Locks on Weather Shield Hurd Kolbe Thermatru Therma-Tru Peachtree doors with multipoint door locks with Hoppe manual tongue locks.

#8778159 – Component Specifications:

Below are the exact details of this particular Hoppe Manual Tongue Lock without Shootbolt component. Other variations are available.

Component Details

Brand:   Hoppe Series: HLS-9000, Handle Above European Profile Cylinder

Configuration:     Multi-point Tongue Lock only, Does not lock at top and bottom, No Shoot Bolt

Component:        Locking Gear

Model Number:    8778159

Backset:           35mm (1 3/8″)  Measurement from Edge of Door to Center of Handle

Dead Bolt Throw:     14mm ( 1/2″) Center of Handle to Center of Key Hole.

Activation:     Manual, Lift handle to engage tongue, Turn thumb turn to lock deadbolt securely.

Faceplate Width:   16mm (5/8″)

Lock Points:    Tongue locking point    6 5/16 “

Handle Height:     36″ From Bottom of Door to Center of Handle.

Door Brands Used on:     Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru

Variations available:

Activation Types:  Manual Activation,  Automatic Activation and Electronic Activation.

Multipoints:           For Manual Activated multipoint lock systems, 3 Point with shootbolt, Hook bolt, Round bolt, Tongue and Roller Pin version are available.

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Backset Variations:       Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) ,  45mm (1 3/4″) ,  60mm  (2 3/8″) and  70mm (2 3/4″).

Click on the   “Part Number”  below to take you to the product page.

Where to Buy Hoppe 8778159 Manual  Multipoint Tongue Locking System.

Hoppe multipoint door lock are the absolute best multi point tongue lock to have installed on your hurricane rated impact door. The multipoint tongue lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your tongue lock, Hoppe is a great brand to go with.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
• Approved for Hurricane HVHZ zones
• Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.