Description
2406514 Hoppe Manual Lock Gear.
The Hoppe #2406514 Manual Lock Gear, HLS-9000 Series with Shoot Bolt Only -16mm Faceplate, 3 Point Lock Version. 60mm Backset, 25mm deadbolt throw.
If you are not sure about the 3 point multi-point lock or lock components you need, Click Here to have us help you find them.
Hoppe multipoint door locks are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.
- It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
- Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
- Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
- Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
- Easily open and close your door with minimal effort.
Component Specifications:
Below are the exact details of this particular Hoppe Manual 3 Point Multipoint Lock component. Other variations are available.
Component Details
Brand: Hoppe Series: HLS-9000, Handle Above European Profile Cylinder Configuration: Multi-point Locking System Component: Locking Gear Model Number: 2406514 Activation: Manual, Lift handle to engage shootbolt, Turn thumb turn to lock securely. Faceplate Width: 16mm (5/8") Lock Points: Bottom Shoot bolt only - 3 point lock Handle Height: 36" From Bottom of Door to Center of Handle. Backset: 60mm (2 3/8") Measurement from Edge of Door to Center of Handle PZ Dimension: 92mm (3 5/8") Center of Handle to Center of Key Hole. Dead Bolt Throw: 25mm ( 1") Center of Handle to Center of Key Hole. Multi-Point Position: None, shoot bolt only, 3 point lock. Bottom Roller Position: None
|
Variations available:
Activation Types: Manual Activation, Automatic Activation and Electronic Activation.
Multipoints: For Automatic Multipoint Lock Systems – Available in Tongue and Roller pin Versions only. For Manual Activated multipoint lock systems, 3 Point with shootbolt, Hook bolt, Round bolt, Tongue and Roller Pin version are available.
Faceplate Widths: 16mm (5/8″) and 20mm (3/4″)
Backset Variations: Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) , 45mm (1 3/4″) , 60mm (2 3/8″) and 70mm (2 3/4″).
Click on the “Part Number” below to take you to the product page.
| Part Number | Lock Part | Locking Point | Extension Length | Description | Trimmable |
| 8778611 | Top Extension | Shootbolt | 400 mm (15.74″) | M / 400 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8778615 | Top Extension | Shootbolt | 475 mm (18.70″) | M / 475 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8778619 | Top Extension | Shootbolt | 550 mm (21.65″) | M / 550 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8778623 | Top Extension | Shootbolt | 625 mm (24.60″) | M / 625 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8778627 | Top Extension | Shootbolt | 700 mm (27.55:”) | M / 700 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8778631 | Top Extension | Shootbolt | 775 mm (30.51″) | M / 775 / SB1 / 16-SC / 20 / 100 | Yes – Trimmable up tp 3.93″ Max |
| 8779199 | Middle Extension | None | 191 mm (7.51″) | M / 191 / 16-SC / K/ZC | No |
| 2424114 | Middle Extension | None | 441 mm (17.36″) | M / 441 / 16-SC / K/ZC | No |
| 8778691 | Middle Extension | None | 691 mm (27.20″) | M / 691 / 16-SC / K/ZC | No |
| 8778695 | Middle Extension | None | 1141 mm (44.92″) | M / 1141 / 16-SC / K/ZC | No |
| 8778699 | Middle Extension | None | 1591 mm (62.63″) | M / 1591 / 16-SC / K/ZC | No |
| 3174559 | Middle Extension | None | 2041 mm (80.35″) | M / 2041 / 16-SC / K/ZC | No |
| Part Number | Lock Part | Locking Point | Backset | Dead Bolt Throw | Description |
| 8778339 | Gear | Shootbolt | 35mm (1.38) | 14mm (0.55) | M/35/14 / 914 / SB1 / 16-SC / 20 |
| 8778343 | Gear | Shootbolt | 45mm (1.77) | 14mm (0.55) | M/45/14 / 914 / SB1 / 16-SC / 20 |
| 8778335 | Gear | Shootbolt | 35mm (1.38) | 25mm (1.00) | M/35/25 / 914 / SB1 / 16-SC / 20 |
| 8778331 | Gear | Shootbolt | 45mm (1.77) | 25mm (1.00) | M/45/25 / 914 / SB1 / 16-SC / 20 |
| 2406514 | Gear | Shootbolt | 60mm (2.375) | 25.4mm (1.00) | M/60/25 / 914 / SB1 / 16-SC / 20 |
| 2406522 | Gear | Shootbolt | 70mm (2.75) | 25.4mm (1.00) | M/70/25 / 914 / SB1 / 16-SC / 20 |
| 2875118 | Cover Plate | N/A | N/A | N/A | 37×16 mm |
Advantages of the Hoppe 2406514 Manual 3 Point Multipoint Door Locking System.
Hoppe multipoint door lock are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.
- Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
- Approved for Hurricane HVHZ zones
- Easily open and close your door with minimal effort.
Multipoint locks and what to do if they happen to fail.
When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.
We try to keep Hoppe lock products in stock for you to order.
Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.
If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.
