Hoppe Multipoint Door Locks & Gearbox Replacement Parts. Fastest way to Repair your Hoppe HLS-9000 Multi-Point Door Lock.
Table Of Contents:
***Available Hoppe Replacement Gear Boxes***
Replacement
Gearboxes
"How To"
Step - By - Step "How To" Measure Your Gearbox Replacement Procedure
IWP-35-92-25
Replacement
Gearboxes
1 3/8"BACKSET IN STOCK
FREE SHIPPING
IWP-45-92-25
Replacement
Gearboxes
1 3/4" BACKSET IN STOCK
FREE SHIPPING
IWP-60-92-25
Replacement
Gearboxes
2 3/8" BACKSET
GEARBOX
INSTALLATION
VIDEO
STEP BY STEP
INSTALL VIDEO
STOP!!!!! BEFORE ORDERING A HOPPE REPLACEMENT GEAR BOX, YOUR CURRENT LOCK MUST HAVE THE MIS-HANDLING DEVICE WEDGE SHOWN BELOW.
"How To" Guide to Locate and Order a Hoppe Multi-Point Lock Replacement. Follow the steps below, and gather all the information and measurements needed to find your Hoppe Lock components."
If you need the complete Hoppe HLS-9000 lock body, Use this to gatheryour lock details and measurements.
Scroll Down To Locate Your Lock Type
1. Measure Your Existing Lock, WRITE DOWN ALL (4) MEASUREMENTS FOR STEPS 1 THRU 4
Step #1 Measure Your Backset.
Step #2 Measure Your "PZ"
Step #3 Measure Your Door Panel Thickness.
Step #4 Measure Your Deadbolt Throw
2. What Type of Door Lock Do You Need? “2 Point In-active Lock”, “3 Point Lock”, “3 Point Edge Only Lock Points” or “5 Point Lock”? WRITE DOWN (1) LOCK TYPE – “A, B, C, D OR E”
TYPE (A) - 2 Point In-Active Door Lock
Locks wih Top and bottom Shootbolts Only. LOCKS INTO THE FRAME HEADER & SILL.
TYPE (B) - Single Point Active Door Lock
Locks At Deadbolt Only. DOES NOT LOCK ANYWHERE ELSE.
TYPE (C) - 3 Point Active Door Lock
Locks with Deadbolt and Top & Bottom Shootbolts. NO OTHER EDGE LOCKING POINTS.
TYPE (D) - 3 Point "Edge Locking"
Locks on side Edge of the Door Panel Only. NO TOP OR BOTTOM SHOOTBOLTS.
TYPE (E) - 5 Point Lock
Locks with Deadbolt and Top & Bottom Shootbolts & Side Edge Locking Points.
3. Measure Your Handle Height & Edge Locking Points, If you have them. WRITE THESE MEASUREMENTS DOWN.
STEP #1 What is the Measurement to the first Edge Locking Point from the bottom of the door panel Up to the center of the Lower Edge Locking Point?
STEP #2 Measure the Handle Height from the bottom of the door panel to the Handle Height Line?
STEP #3 What is the Measurement to the first Edge Locking Point from the bottom of the door panel Up to the center of the Upper Edge Locking Point?
4. What Type of "Edge Locking Points" Do You Have, If Any? THESE WILL BE ON THE EDGE OF THE DOOR, WRITE DOWN THE EDGE LOCKING TYPE YOU CURRENTLY HAVE.
TYPE 1 -Tongue
TYPE 2 -Roller Pin
TYPE 3 -Swinghook
TYPE 4 -RoundBolt
TYPE 5 -NO EDGE LOCKING POINTS
5. Handle / Lock Configuration
TYPE “A” Handle ABOVE European Profile Key Cylinder- (HLS-9000 Series) – Most Common
TYPE “B” Handle BELOW American Key Cylinder – (HLS-7 Series) – Special Order
Handle Above = HLS-9000 Series
Handle Below = HLS7 Series
Key Above = American Cylinder
Key Below = European Profile Cylinder
With the details you have gathered, you should be able to locate the lock that you are seeking. Scroll down to the category that fits the details you have collected. Use the details you have collected to navigate to your new lock body.
Hoppe Active Panel Locks - Manual Activation
Gearboxes to repair Hoppe HLS-9000 multipoint door Locks that currently have a small mis-handling device wedge between the latch and the deadbolt.
35mm Gearbox only
35-92-25
ALWAYS IN STOCK
Hoppe 35-92-25
Gearbox only, 35mm ( 1 3/8″ ) Backset with a 1″ deadbolt. Replaces all CURRENT Hoppe HS-9000 multipoint gear boxes on existing locks with a ” Mis-Handling /Device Wedge just above the Deadbolt, On the EDGE of the door” feature just above the Deadbolt
45MM Gearbox only
45-92-25
ALWAYS IN STOCK
Hoppe 45-92-25
Gearbox only, 45mm ( 1 3/4″ ) Backset with a 1″ deadbolt. Replaces all CURRENT Hoppe HS-9000 multipoint gear boxes on existing locks with a ” Mis-Handling /Device Wedge just above the Deadbolt, On the EDGE of the door” feature just above the Deadbolt
60MM Gearbox only
60-92-25
USUALLY IN STOCK
Hoppe 60-92-25
Gearbox only, 60mm ( 2 3/8″ ) Backset with a 1″ deadbolt. Replaces all CURRENT Hoppe HS-9000 multipoint gear boxes on existing locks with a ” Mis-Handling /Device Wedge just above the Deadbolt, On the EDGE of the door” feature just above the Deadbolt
70MM Gearbox only
70-92-25
SPECIAL ORDER
Hoppe 70-92-25
Gearbox only, 70mm ( 2 3/4″ ) Backset with a 1″ deadbolt. Replaces all CURRENT Hoppe HS-9000 multipoint gear boxes on existing locks with a ” Mis-Handling /Device Wedge just above the Deadbolt, On the EDGE of the door” feature just above the Deadbolt
Hoppe Single Point Locks -HLS-9000 - Deadbolt Only
Hoppe Single point locks. Locks only at the deadbolt. . Does not require lifting of the handle to lock, NOT A REPLACEMENT FOR MULTIPOINT GEARBOX.
Single Point - Locks At Deadbolt Only
Single Point
35 / 14
SPECIAL ORDER 2 WEEKS
Single Point
35 / 25
SPECIAL ORDER 2 WEEKS
Single Point
45 / 14
SPECIAL ORDER 2 WEEKS
Single Point
45 / 25
SPECIAL ORDER 2 WEEKS
Single Point
60 / 25
SPECIAL ORDER 2 WEEKS
Single Point
70 / 25
SPECIAL ORDER 2 WEEKS
3 Point Multipoint Locks - Manual Activation
By Edge Locking Point Types
Locks at the Deadbolt and two other locking points only.
3 Point - Edge Locking Points Only
Hoppe Tounge Lock
Hoppe Roller Pin
Hoppe Swing Hook Lock
Hoppe Swing Hook Lock
Hoppe Roundbolt
3 Point - Deadbolt & Top / Bottom Shootbolts Only
Hoppe 3 Point Lock
Variable 3-Point lock
Hoppe 3 Point Lock
5 Point Locks - Manual Activation
By Edge Locking Type
Locks at The Deadbolt, (2) Edge locking points and(2) Shootbolts.
5 Point Locks- (1) Deadbolt, (2) Edge Locking Points, (2) Shootbolts
Tongues With Shootbolts
Hoppe Tongue Lock With Bottom Shootbolt
Roller Pins With Shootbolts
Hoppe Roller Pin With Shootbolt
Swinghooks
With
Shootbolts
Hoppe Swing Hook Lock With Bottom Shootbolt
Roundbolts
with
Shootbolt
Hoppe Roundbolt Lock with Bottom Shootbolt
Hoppe Active Panel Locks - Automatic Activation
Automatic 3 Point Locks - Edge Locking Points Only
35mm & 45mm Backsets, Not Available With Shootbolts
Automatic 3 Point - Deadbolt & Edge Locking Points Only
Automatic Tongue Locks
Automatic Tongue multipoint locks, No Shootbolt
This type of automatic tongue lock activates it’s side edge tongue locking point when the door is closed. Just turn the thumb turn to lock the door. Lever handle does not have to be lifted to activate locking points, Only available in 35mm and 45mm backsets. Not available with shootbolts.
Automatic Tongue Top Extensions
Automatic Tongue multipoint locks, No Shootbolt
Top extensions for automatic tongue locks, Trimmable for a variety of door heights.
Automatic Roller Pin Locks
This type of automatic roller pin lock activates it’s side edge roller pin locking point when the door is closed. Just turn the thumb turn to lock the door. Lever handle does not have to be lifted to activate locking points, Only available in 35mm and 45mm bacskets. Not available with shootbolts.
Automatic Roller Pin Top Extensions
Automatic Roller Pin Top Extensions
Top extensions for automatic roller pin locks, Trimmable for a variety of door heights.
Inactive 2 Point Door Lock - Manual Activation
Available in 35mm, 45mm, 60mm & 70mm Backsets
36" Handle Height, , Top and Bottom Shootbolt Locking Points Only
2 Point In-Active Door Lock- Top / Bottom Shootbolts Only
Hoppe In-Active Lock
Hoppe In-Active Door Lock
For In-active 2 Point Locks with a handle height of exactly 36″ from the bottom the the door panel up to the center of the handle.
Variable In-Active Lock
Hoppe In-Active Door Lock
For In-active 2 Point Locks with a handle height between 34 1/14″ to 38 1/8″. This Lock body requires a Lower Extension and cover plate. Add a Top extension for a complete locking system.
Multi-point Locks Specific To Door Manufacturer
Locks Known To Be Used Exclusively By Door Manufacturer
Caradco 4101341 Actiive Lock
Caradco Active Door Lock
This lock is for a Caradco 4101341 active door. Also works on Jeld-wen active French doors.
Caradco 4101341 In-active Lock
This lock is for the in-active panel on a double French door.
PGT 750 Series Concealed Door Lock
This lock is a concealed lock that fits inside of a PGT 750 series French door. It has a top and bottom coupler for 5/16″ threaded rods. Lock is activated by lifting the lever handle which engages the top and bottom rods into the frame header and sill. Lock has a 2 3/8″ Backset, Handle below dead bolt.
Marvin Door Locks (Formally SIW Windows and Doors, Fullex Replacement locks for Ultimate Doors of Palm Beach, Weather Shield Legacy Series Door Locks, Caradco, Jeld-Wen, Peachtree and More.....
SIW / Marvin Door Lock
SIW French Door Replacement multipoint locks
Ultimate Door of Palm Beach
Ultimate Door of Palm Beach French Door Replacement multipoint locks
Weather Shield
Legacy series locks
Weather Shield Legacy series French door lock replacement
Common Signs That Indicate Your Multi-Point Lock Will Fail Soon.
When was the last time you Lubricated Your Multipoint Door Locks to increase their operation and lifespan?
- Lock Get Jammed Easily
- Handle Sags Downward
- Broken Return Springs
- Stripped Spindles
- Ratcheting Lock Engagement
- Broken Lock Keepers
- Deadbolt Does Not Extend
- Crunchy Noise When Locking
