Hoppe Locksmith in Page, ND That Replace Multi-point Door Lock Systems.
We are here to Help Lock Replacement Company, Homeowners,Trade Professionals and Door Lock Service.
If You Are a Lock Replacement Company, Trade Professionals, Door Lock Service, Homeowners in Page and all over Cass county, and you are searching for clever lock repair professionals to fix their multipoint door locks, in the 38017 zipcode.
There isn't enough multipoint lock repair companies to Help Page homeowners.
Unfortunately, many repair companies refuse to service Hoppe multi-point locks.
HERE ARE SOME OF THE REASONS WHY.
- 1. American type door locks have been around for centuries and multi-point locks only decades. Many handy man services would prefer to work only on the older conventional locking systems.
- 2. Hoppe multipoint locks are usually supplied directly to door manufacturers, and can be very hard getting the replacement lock you need. If the part is out of warranty, they may not offer any assistance.
- .3. There is not much training provided on Hoppe locks, Especially in Page, North Dakota 38017. This includes door prep, machining for installation, replacement, trouble shooting or even yearly adjustments.
- 4. Most multi-point lock manufacturers do not label the locks with a sku number for replacement. This can be aggravating if you do not know how to properly measure and order.
- 5. There are plenty of multipoint lock that make many stock and custom series product line locks with varying locking types, handle heights, backset sizes, deadbolt measurement, PZ measurements, handle position to key hole, American or European lock cylinder, Manual or Automatic activation, Key wind operation or with top and bottom shootbolts. VERY DIFFICULT WITHOUT ANY GUIDANCE RIGHT?
*** Lock Replacement Company, Trade Professionals and Door Lock Service, CLICK BELOW TO PRINT OUT THE HOPPE FIELD MULTIPOINT MEASURING GUIDE **
********* FIELD WORKSHEET SUBMISSION OPTIONS********
A. ONLINE - SUBMIT MEASUREMENT DETAILS BELOW
. B. FAX - FIELD WORKSHEET TO (954) 971-4588
C. SCAN WORKSHEET AND EMAIL TO: HOPPELOCKS@GMAIL.COM
Assortment of {Locks|Multipoint Locks|Locking Systems We Typically Supply in Page, North Dakota.
Tongue Locks
Roller Pin Locks
Round Bolt Locks
Swing Hook Locks
In-Active & Active Shootbolt Locks
We Have Hoppe Lock Gearboxes. The Quickest Solution to Repair a Hoppe HLS-9000 Manually Operated Tongue Locking System.
- Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
- Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
- Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
- Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
- No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..
Replacement Lock to Repair Caradco 4101341 Active and In-active French Doors.
- Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
- Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
- Works on Left or Right Caradco Swinging doors.
We Are Looking to Help Assist Page Lock Replacement Company, Trade Professionals, Door Lock Service and “Do It Your Selfers”. The Most Difficult Thing Is To Find and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service
FAQ - Frequently Asked Questions: From Page locksmiths and residents, about Hoppe Locks.
Q. Can you just replace the gearbox to repair a Hoppe HLS-9000 lock?
A. Yes, If the lock is the current version, You may only need a replacement gearbox. The current Hoppe multipoint locks have what is called a “dead Latch” or “mis-handling device wedge”, between the latch and the deadbolt. Your existing lock that you are replacing must be equipped with one of these. Older lock versions missing this device, will not accommodate a new Hoppe gearbox on the lock strip faceplate. The entire lock gear body must be replaced.
Q. Is it very difficult to install the replacement gearbox on a Hoppe Lock?
A. No, There are only 2 screws to remove to replace the gearbox. Once you remove the handle set and lock gear, there are two machine screws that attach the gearbox to the lock strip faceplate. Remove the screws and attach you new gearbox, making sure that the lock shift rail is connected to the tranfer bar on the back side of the lock strip faceplate.
Q. Does a replacement Hoppe gearbox work on an automatic tongue lock?
A. No, We only have replacement gearboxes for manual Hoppe Locks. Hoppe HLS-9000 manually operated gearboxes will not work on a Hoppe Automatic engaging lock. The lock strip faceplate does not have a cutout for a mis-handling device wedge, nor will it engage when the door is closed. Manual locks engage the locking points when the lever handle is lifted upwards.
Q. Do you know of any locksmiths that repair Hoppe multipoint locks near Page, North Dakota, or anywhere close to Cass county?
A. No, but if you find a local Page locksmith that is will to do the work, we can help them out with taking all the correct measurements, ordering the correct lock and answering any questions needed to replace the lock. We have a collection of instructional forms and videos that help make the task much easier. A good handyman or a mechanically inclined homeowner should be able to perform the repair.
Q. Do you have Caradco 4101341 multipoint locks for both panels in a double French door?
A. Yes, The Caradco 4101341 type lock is available for the active and passive door panels. The actual lock body is 41 inches and separates approximately 10 inches up from the bottom and about 62 inches from the bottom of the door panel. The upper and lower shoot bolt extensions do not need to be replaced. Top and bottom shoot bolt extensions rarely ever need replacement.
How To Videos for Hoppe Lock replacement in Page, North Dakota and other cities near Cass county.
Tags: 38017, hoppe, Lock Replacement Company, Multipoint, North Dakota, Page