Hoppe Locksmith in Fincastle, TN That Repair Multipoint Door Lock Systems.
We are here to Assist Door lock repair company, Contractors,Door lock company and Door Builder.
If You Are a Door lock repair company, Door lock company, Door Builder, Homeowners in Fincastle and all over Campbell county, and you are searching for clever lock repair professionals to fix their multipoint door locks, in the 47013 zipcode.
There are not enough multipoint lock repair companies to Assist Fincastle customers.
Unfortunately, some door repair shops refuse to work on 3 point locks.
HERE ARE SOME OF THE REASONS WHY.
- 1. Older locks have been used for centuries and Hoppe multipoint locks only decades. Many locksmiths would prefer to mainly service the older conventional locking systems.
- 2. Hoppe multipoint locks are usually supplied directly to door manufacturers, and will be very tough getting the replacement lock you need. If the part is out of warranty, they may not be of any help.
- .3. There is virtually no training available on Hoppe locks, Especially in Fincastle, Tennessee 47013. This pertains to door prep, machining for installation, replacement, trouble shooting or even periodic maintenance.
- 4. Most 3 point lock providers do not label the locks with a catalog number for ordering. This can be frustrating if you do not know how to correctly measure and order.
- 5. There are several multipoint lock that make several stock and custom series product line locks with varying locking types, handle heights, backset distances, deadbolt throws, PZ measurements, handle location to key hole, American or European lock cylinder, Manual or Automatic activation, Key wind operation or with top and bottom shootbolts. VERY TOUGH WITHOUT ANY HELP RIGHT?
*** Door lock repair company, Door lock company and Door Builder, CLICK BELOW TO PRINT OUT THE HOPPE FIELD MULTIPOINT MEASURING GUIDE **
********* FIELD WORKSHEET SUBMISSION OPTIONS********
A. ONLINE - SUBMIT MEASUREMENT DETAILS BELOW
. B. FAX - FIELD WORKSHEET TO (954) 971-4588
C. SCAN WORKSHEET AND EMAIL TO: HOPPELOCKS@GMAIL.COM
Kinds of {Locks|Multipoint Locks|Locking Systems We Commonly Provide in Fincastle, Tennessee.
Tongue Locks
Roller Pin Locks
Round Bolt Locks
Swing Hook Locks
In-Active & Active Shootbolt Locks
We Stock Hoppe Lock Gearboxes. The Fastest Solution to Repair a Hoppe HLS-9000 Manually Operated Swing Hook Locking System.
- Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
- Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
- Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
- Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
- No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..
Replacement Lock to Repair Caradco 4101341 Active and In-active French Doors.
- Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
- Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
- Works on Left or Right Caradco Swinging doors.
We Are Looking to Assist Assist Fincastle Door lock repair company, Door lock company, Door Builder and “Do It Your Selfers”. The Hardest Task Is To Locate and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service
FAQ - Frequently Asked Questions: From Fincastle locksmiths and residents, about Hoppe Locks.
Q. Can you just replace the gearbox to repair a Hoppe HLS-9000 lock?
A. Yes, If the lock is the current version, You may only need a replacement gearbox. The current Hoppe multipoint locks have what is called a “dead Latch” or “mis-handling device wedge”, between the latch and the deadbolt. Your existing lock that you are replacing must be equipped with one of these. Older lock versions missing this device, will not accommodate a new Hoppe gearbox on the lock strip faceplate. The entire lock gear body must be replaced.
Q. Is it very difficult to install the replacement gearbox on a Hoppe Lock?
A. No, There are only 2 screws to remove to replace the gearbox. Once you remove the handle set and lock gear, there are two machine screws that attach the gearbox to the lock strip faceplate. Remove the screws and attach you new gearbox, making sure that the lock shift rail is connected to the tranfer bar on the back side of the lock strip faceplate.
Q. Does a replacement Hoppe gearbox work on an automatic tongue lock?
A. No, We only have replacement gearboxes for manual Hoppe Locks. Hoppe HLS-9000 manually operated gearboxes will not work on a Hoppe Automatic engaging lock. The lock strip faceplate does not have a cutout for a mis-handling device wedge, nor will it engage when the door is closed. Manual locks engage the locking points when the lever handle is lifted upwards.
Q. Do you know of any locksmiths that repair Hoppe multipoint locks near Fincastle, Tennessee, or anywhere close to Campbell county?
A. No, but if you find a local Fincastle locksmith that is will to do the work, we can help them out with taking all the correct measurements, ordering the correct lock and answering any questions needed to replace the lock. We have a collection of instructional forms and videos that help make the task much easier. A good handyman or a mechanically inclined homeowner should be able to perform the repair.
Q. Do you have Caradco 4101341 multipoint locks for both panels in a double French door?
A. Yes, The Caradco 4101341 type lock is available for the active and passive door panels. The actual lock body is 41 inches and separates approximately 10 inches up from the bottom and about 62 inches from the bottom of the door panel. The upper and lower shoot bolt extensions do not need to be replaced. Top and bottom shoot bolt extensions rarely ever need replacement.
How To Videos for Hoppe Lock replacement in Fincastle, Tennessee and other cities near Campbell county.
Tags: 47013, Door lock repair company, Fincastle, hoppe, Multipoint, Tennessee