Hoppe Locksmith in Burnsville, NC That Work On Multi-point Door Locks.

We are here to Help Lock repair professionals, Contractors,Door repair man and Lock Replacement Company.

If You Are a Lock repair professionals, Door repair man, Lock Replacement Company, Homeowners in Burnsville and all over Yancey county, and you are searching for competent lock repair professionals to replace their Hoppe door locks, in the 37199 zipcode.

There isn't enough Hoppe lock repair companies to Help Burnsville customers.

Even worse, some door repair shops will not even look at Hoppe locks.

HERE ARE MANY OF THE REASONS WHY.

1. Older locks have been around for centuries and multipoint locks only decades. Many locksmiths would prefer to work only on the older one point deadbolt/handle systems.
2. 3 point locks are usually supplied directly to door manufacturers, and are very hard locating the replacement lock you need. If the lock is out of warranty, they may not be of any replacement.
.3. There is virtually no training offered on multipoint locks, Especially in Burnsville, North Carolina 37199. This involves door prep, machining for installation, replacement, trouble shooting or even yearly adjustments.
4. Most multi-point lock providers do not mark the locks with a catalog number for replacement. This can be aggravating if you do not know how to properly measure and order.
5. There are plenty of multipoint lock companies DIY Homeowners Can Also Locate and Fix Their Own Multi-Point Locking Systems As Well !!
Fill out the quick and easy Online Measurement form and get results. WE MAKE IT SIMPLE!!!

CLICK TO VIEW ONLINE FORM NOW

Assortment of {Locks|Multipoint Locks|Locking Systems We Typically Provide in Burnsville, North Carolina.

Tongue Locks

3 POINT TONGUE LOCKS

5 POINT TONGUE LOCKS

Manual and Automatic Engaging Tongue Locks. 3 Point Edge Locking System.

Manual Engaging Tongue Locks With Top & Bottom Shootbolts. 5 Point Locking System,

Roller Pin Locks

3 POINT ROLLER PIN LOCKS

5 POINT ROLLER PIN LOCKS

Manual and Automatic Engaging Roller Pin Locks. 3 Point Edge Locking System.

Manual Engaging Roller Pin Locks With Top & Bottom Shootbolts. 5 Point Locking System,

Round Bolt Locks

3 POINT ROUND BOLT LOCKS

5 POINT ROUND BOLT LOCKS

Manual Engaging Round Bolt Locks. 3 Point Edge Locking

Manual Engaging Round Bolt Locks With Top & Bottom Shootbolts. 5 Point Locking System,

Swing Hook Locks

3 POINT SWING HOOK LOCKS

5 POINT SWING HOOK LOCKS

Manual Engaging Swing Hook Locks. 3 Point Edge Locking

Manual Engaging Swing Hook Locks With Top & Bottom Shootbolts. 5 Point Locking System,

In-Active & Active Shootbolt Locks

2 POINT IN-ACTIVE DOOR SHOOTBOLT LOCKS

3 POINT ACTIVE SHOOTBOLT LOCKS

Manual Engaging In-Active Locks. 2 Point Frame/Sill Locking

Manual Engaging Shootbolt Lock. Locks at Deadbolt, Top & Bottom Shootbolts. 5 Point Locking System,

We Have Hoppe Lock Gearboxes. The Quickest Solution to Repair a Hoppe HLS-9000 Manually Operated Tongue Lock System.

Repairs ALL Current Hoppe manually operated HLS-9000 multipoint door locks, regardless of locking point types. Usually in stock and ships nationwide in 3-5 days.
Repairs sagging handles, drooping handles on Hoppe locks. This Option is a favorite for locksmith companies and Sarasota residents. Gearbox installs with only (2) screws, mounts on existing faceplate and provides a quick repair alternative. .
Existing Hoppe lock must have a "Mis-Handling device" or also called a dead latch. This small wedge is depressed when the door is closed and allows the lever handle to be lifted to engage the locking points.
Works on Left or Right Swinging doors. Latch and mis-handling device wedge can be reversed in seconds to change the handing.
No More Sagging Handles door. Does your lock have a drooping handle? When the internal gear cog or return spring gets worn down or is broken, it causes the lever handle to droop or sag downward from the horizontal rest position..

Replacement Lock to Repair Caradco 4101341 Active and In-active French Doors.

Caradco 4101341 Active multipoint door lock. This lock was used by Caradco French doors that had a manually activated lock.
Repairs sagging handles, drooping handles on Caradco Doors. This Option is a favorite for locksmith companies and Sarasota residents.
Works on Left or Right Caradco Swinging doors.

We Are Looking to Help Assist Burnsville Lock repair professionals, Door repair man, Lock Replacement Company and “Do It Your Selfers”. The Hardest Thing Is To Locate and Order the Correct Lock. It’s All Down Hill From There. We Have Simplified The Process and Offer a Seamless Parts Supply Service

Need More Help? Call Us @ (954) 804 -1044 To Speak To A Multi-Point Lock Professional.

Our Technical Team Is Here To Help. We Can Walk You Through The Details And Assist You With Your Lock Replacement.

Weather Shield French Doors with Hoppe roller pin multipoint locks in Burnsville, North Carolina, 37199 and all over Yancey county.

PGT 750 series concealed 3 point rod locking system.56-100 in Burnsville, North Carolina, 37199 and all over Yancey county.

Fullex Multipoint lock replacement on Ultimate doors of Palm Beach. in Burnsville, North Carolina, 37199 and all over Yancey county.

Caradco 4101341 Active and inactive multpoint door lock system. in Burnsville, North Carolina, 37199 and all over Yancey county.

Milgard Multipoint locks in Burnsville, North Carolina, 37199 and all over Yancey county.

56-175 Concealed Multipoint door lock with rods, 3 point lock

Hoppe tongue lock for Marvin French doors in Burnsville, North Carolina, 37199 and all over Yancey county.

Hoppe 5 point multi-point lock for Loewen French doors in Burnsville, North Carolina, 37199 and all over Yancey county.

3 point Hoppe HLS-9000 replacement door lock for Anlin French doors. in Burnsville, North Carolina, 37199 and all over Yancey county.

Lincoln Replacement door locks in Burnsville, North Carolina, 37199 and all over Yancey county.

La Finestra a multipoint door lock replacement locks that used Hoppe 5 point lock systems in Burnsville, North Carolina, 37199 and all over Yancey county.

Jeld-wen French doors with sagging or Drooping handles. Hoppe Lock replacement gearbox will repair a broken lock. in Burnsville, North Carolina, 37199 and all over Yancey county.

Replacement locks for Discontinued Eagle French doors in Burnsville, North Carolina, 37199 and all over Yancey county.

Lock to repair Hurd doors with broken locks in Burnsville, North Carolina, 37199 and all over Yancey county.

Sierra Pacific Multipoint door lock in Burnsville, North Carolina, 37199 and all over Yancey county.

3 point door lock to repair Hurd broken door locks in Burnsville, North Carolina, 37199 and all over Yancey county.

Therma-Tru replacement lock to repair the broken 3 point and 5 point tongue lock on older thermatru French doors. in Burnsville, North Carolina, 37199 and all over Yancey county.

FAQ - Frequently Asked Questions: From Burnsville locksmiths and residents, about Hoppe Locks.

Q. Can you just replace the gearbox to repair a Hoppe HLS-9000 lock?

A. Yes, If the lock is the current version, You may only need a replacement gearbox. The current Hoppe multipoint locks have what is called a “dead Latch” or “mis-handling device wedge”, between the latch and the deadbolt. Your existing lock that you are replacing must be equipped with one of these. Older lock versions missing this device, will not accommodate a new Hoppe gearbox on the lock strip faceplate. The entire lock gear body must be replaced.

Q. Is it very difficult to install the replacement gearbox on a Hoppe Lock?

A. No, There are only 2 screws to remove to replace the gearbox. Once you remove the handle set and lock gear, there are two machine screws that attach the gearbox to the lock strip faceplate. Remove the screws and attach you new gearbox, making sure that the lock shift rail is connected to the tranfer bar on the back side of the lock strip faceplate.

Q. Does a replacement Hoppe gearbox work on an automatic tongue lock?

A. No, We only have replacement gearboxes for manual Hoppe Locks. Hoppe HLS-9000 manually operated gearboxes will not work on a Hoppe Automatic engaging lock. The lock strip faceplate does not have a cutout for a mis-handling device wedge, nor will it engage when the door is closed. Manual locks engage the locking points when the lever handle is lifted upwards.

Q. Do you know of any locksmiths that repair Hoppe multipoint locks near Burnsville, North Carolina, or anywhere close to Yancey county?

A. No, but if you find a local Burnsville locksmith that is will to do the work, we can help them out with taking all the correct measurements, ordering the correct lock and answering any questions needed to replace the lock. We have a collection of instructional forms and videos that help make the task much easier. A good handyman or a mechanically inclined homeowner should be able to perform the repair.

Q. Do you have Caradco 4101341 multipoint locks for both panels in a double French door?

A. Yes, The Caradco 4101341 type lock is available for the active and passive door panels. The actual lock body is 41 inches and separates approximately 10 inches up from the bottom and about 62 inches from the bottom of the door panel. The upper and lower shoot bolt extensions do not need to be replaced. Top and bottom shoot bolt extensions rarely ever need replacement.