Hoppe lock gear box is all you need to repair your Hoppe HLS-9000 Multi-point door lock that has a sagging handle or drooping lever handle. If the handle on the door does not return to the horizontal position, Then the lock return spring is broken. Do you need a Hoppe multi-point lock to repair the handle the is hanging down? We can help identify the correct door lock you will need to replace your old one. Simply by answering a few questions, we can find your replacement lock and ship it to you. We have many decades experience with Hoppe replacement parts and know what you will need to fix your lock. We try to keep an inventory of the most popular gear boxes and can send them to you in a matter of days.
- Handle must be over the thumb turn and profile cylinder. (This is typical of all Hoppe Hls-9000 series multipoint door locks)
- Center of handle to center of thumb turn must be 92mm / 3 5/8″ (This is typical of all Hoppe Hls-9000 series multipoint door locks)
- Backset must be 45mm / 1 3/4″ (Very Important, Measure from Edge of Door Panel to Center of Handle)
- Must have a European profile cylinder that is removable when attachment screw on the edge of door panel has been removed.
- This part works only on HLS-9000 multipoint door locks only. It will not work on single point lock applications
Lock Configurations that this part is a direct replacement for:
- HLS-9000 series with or without bottom shootbolts
- HLS-9000 series with round bolt locking points
- HLS-9000 series with tongue type locking points
- HLS-9000 series with roller pin locking points
- HLS-9000 series with hook bolt locking points
Specifications:
- Hoppe lock gear box – #IWP-45-92-25
- 45mm backset (1 3/4″ from edge of door to center of door handle)
- Locking point: Strike Latch and deadbolt (replacement gear box for all HLS-9000 locking systems.)
- 25mm (1″) deadbolt throw (NOTE: 14mm (1/2″) DEADBOLT THROW AVAILABLE – PLEASE DOUBLE CHECK BEFORE ORDERING)
- 16mm (5/8″) Stainless steel faceplate (Not Included)
- 92mm (3 5/8″) from center of handle to center of thumb turn
- Accepts European lock cylinder only. Handle over thumb turn. Need American cylinder? Search Hoppe HLS-7 Series.
- Works on both left swing and right swing doors
Hoppe gear box replacement
Hoppe Lock Gear Box Replacement – HLS-9000 series, 16mm (5/8″) Faceplate. This will replace your broken Hoppe multipoint lock gear drive mechanism. Also repairs sagging or drooping lever handle.
Hoppe Lock Replacement Gear Box Only. This only works on HLS-9000 series locks with 16mm face plates.
Available In only (4) Different Back Sets, and (2) Different Dead Bolt Throw lengths:
Backsets Available:
- 35mm – 1 3/8″ Backset
- 45mm – 1 3/4″ Backset (The Most Commonly Used)
- 60mm – 2 3/8″ Backset
- 70mm – 2 3/4″ Backset
Dead Bolt Throw Lengths Available:
- 14mm – 9/16″ Dead Bolt Throw Length (Not Available on 60mm & 70mm Backsets)
- 25mm – 1″ Dead Bolt Throw Length
Click on the part number and you will be taken directly to the product page where you can view specifications, Add to cart or proceed to checkout.
Part Number | Lock Part | Locking Point | Backset | Dead Bolt Throw | Description |
IWP-35-92-14 | 35mm Gear Box Only | 14mm Dead Bolt, Multi-Point | 35mm (1.38) | 14mm (.55) | HLS-9000 35-92-14 Gear Box |
IWP-35-92-25 | 35mm Gear Box Only | 25mm Dead Bolt, Multi-Point | 35mm (1.38) | 25mm (1.00) | HLS-9000 35-92-25 Gear Box |
IWP-45-92-14 | 45mm Gear Box Only | 14mm Dead Bolt, Multi-Point | 45mm (1.77) | 14mm (.55) | HLS-9000 45-92-14 Gear Box |
IWP-45-92-25 | 45mm Gear Box Only | 25mm Dead Bolt, Multi-Point | 45mm (1.77) | 25mm (1.00) | HLS-9000 45-92-25 Gear Box |
IWP-60-92-25 | 60mm Gear Box Only | 25mm Dead Bolt, Multi-Point | 60mm (2.36) | 25mm (1.00) | HLS-9000 60-92-25 Gear Box |
IWP-70-92-25 | 70mm Gear Box Only | 25mm Dead Bolt, Multi-Point | 70mm (2.75) | 25mm (1.00) | HLS-9000 70-92-25 Gear Box |