2184018 Hoppe Sliding Door Lock 30mm Backset

$179.46

2184018 Hoppe Sliding Door Lock – 30mm Backset, 3/4″ Faceplate, 2 Hook Locking points

Available on backorder

SKU: 2184018 Categories: , Tags: , , , , Product ID: 19590

Description

2184018 Hoppe Sliding Door Lock – 30mm Backset, 3/4″ Faceplate, 2 Hook Locking points

Hoppe Manual 2 Hook Sliding Door Lock for sliding patio doors, 1 3/16″ Backset and 3/4″ wide flat faceplate, Rounded ends at top and bottom, 30″ O.A.

  • Repairs Hoppe sliding doors with a handle activated 2 hook sliding door lock.

#2184018 – Component Specifications:

Below are the exact details of this particular Hoppe sliding door lock component. Other variations are available.

Component Details

Brand:                           Hoppe Series: HLS-5000, Handle Below American Cylinder
Configuration:              Multi-point Sliding Door Lock
Component:                  Locking Gear
Model Number:             2184018
Backset:                        30mm (1 3/16″)  Measurement from Edge of Door to Center of Handle
Activation:                    Manual, Lift handle to engage hooks, Turn thumb turn to lock
Faceplate Size:             20mm (3/4″) Wide, 30″ O.A. Length with Rounded ends
Lock Points:                  2 Hooks, Edge Locking, 21 14″ from hook to hook
Handle Height:               Can be Mounted at any height
Door Brands Used on:     Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru, Anlin, Windsor, Fleetwood

 

Other Hoppe sliding door, 2 hook locks availble

 

Click on the   “Part Number”  below to take you to the product page.

16mm Faceplate Gear

Part Number:             Description of Part

2082775           30mm ( 1 3/16″) Backset, 16mm (5/8″) Flat Stainless Steel Faceplate, 30 1/2″ Overall

2082783           35mm ( 1 3/8″) Backset, 16mm (5/8″) Flat Stainless Steel Faceplate, 30 1/2″ Overall

20mm Faceplate Gear
2184018           30mm ( 1 3/16″) Backset, 20mm (3/4″) Flat Stainless Steel Faceplate, 30 1/2″ Overall
2184000           35mm ( 1 3/8″) Backset, 20mm (3/4″) Flat Stainless Steel Faceplate, 30 1/2″ Overall

 

Where to Buy Hoppe

2184018 Manual 2 Hook Sliding Door Locks

Hoppe multipoint door lock are the absolute best multi point sliding door lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your tongue lock, Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.
  • American cylinder above handle, HOPPE New Style Sliding door 2 point lock, Multi-Point Lock  will work on most Sliding Patio Doors.  ,Can be retrofitted to most wood doors., Face Plate Measurements:  3/4″  Wide (20mm),  30 inches long., Locking Points: Two Hooks, one Below handle, one above. Hooks: 21-1/4 Inch Center of hooks, Spindle: 7mm
    Lock Body Measurements:  Backset:  1-1/8 inches (30mm) measured from the edge of lock to center of handle Lock Function:  Locking door is a manual function
    When door is closed, a black tab of face of lock is depressed and handle can be turned to extend 2 hooks. ( 21-1/4″ Centers), Outside Key or Inside thumbturn secures in locked position.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

We will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

 

 

Additional information

Weight 7 lbs
Dimensions 32 × 5 × 5 in
Manufacturer

Hoppe

Product Number

2184018

Series

HLS-5000 Series Sliding Door Lock

Lock Engagement

Manual Engagement

Locking Point

2 Hooks Edge Locking

Locking Point Location

Edge hooks

Backset Width

30mm (1 3/16") measured from edge of door to center of handle

PZ Measurement

50mm – 1 15/16"" measured from center of handle to center of keyhole

Faceplate Width

20mm – (3/4") wide x 30" Long

Handle Height

Various, by manufacturer

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.